Fujitsu PRAID CP500i FH/LP contrôleur RAID PCI Express x8 3.0 12 Gbit/s

The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks which form a large logical drive when switched together. Redundancy information is calculated from several data blocks (except for RAID 0) and saved distributed to the individual hard disks. Your operating system no longer accesses the individual hard disks, but the array. The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure. However, the theoretical security of the RAID concept is only as good as the RAID controller used. Benefit from the Fujitsu RAID controllers where technology, experience and practical implementation all ensure the security that your company needs in the event of an emergency.

PRAID CP500i
The Fujitsu PRAID CP500i SAS/SATA controller card based on the LSI SAS3008 allows latest RAID
technology at affordable prices with low power consumption. The PRAID CP500i MegaRAID entry controller card offer users a straight-forward solution that includes essential RAID levels and uncomplicated configuration options. The PRAID CP500i enables to connect to combinations of SATA and SAS hard disk drives and SSD solid state drives, allowing for storage configurations that optimize cost, performance and robust data protection. The CP500i enables increased read/write performance thanks to its RAID 0, 1, 10, 5, 50 implementation. The RAID5
performance of CP500i is suitable for entry requirements. Higher performance is provided by PRAID EP520i, EP540i and EP580i with 2GB, 4GB and 8GB

Benefit from the close alignment of the RAID hardware system and the ServerView® RAID Manager software which offers fast initialization for quick array setup.

Enjoy the world of easy configuration – and the time and cost efficiency that you have been searching for.